電化學槽
電化學測試系統中，恒電位儀和相關控制軟體置於一端，而電化學電解槽裝置（通常安裝在法拉第籠中）置於另一端。 電化學電解槽中工作電極、參考電極和對電極分列在合適的幾何位置上。 除了這些共通點外，不同功能的電解池樣式不同。
Gamry為通用實驗和特殊實驗提供了不同的電化學電解槽。 為了實現規定的任務，每一個電池都設計得盡量靈活，不損害電化學電解槽的功用。
1L 旋轉圓柱體電極電解槽 1L RCE Cell 專為旋轉圓柱研究而設計。 |
 用於小規模電化學工作的DR. BOB S CELL 操作體積為 1-30 mL。 它配備5個多功能埠。 |
EUROCELL 腐蝕電槽套件 容積為 50-200 mL。 EuroCell 適用於帶夾套、可溫度控制的形式。 |
FLEXCELL 臨界點蝕溫度電化學池套件 用於確定臨界點蝕溫度。 可解決困擾大多數其他扁平樣品設計的問題——樣品密封處周圍的縫隙腐蝕。 |
|
MULTIPORT 腐蝕槽套件 容積： 介於 400 mL 和 1200 mL 之間。 2 件式設計允許在樣品槽中放置超大樣品。 |
用於扁平樣品的PARACELL套件 容積： 介於 250 mL 與 400 mL 之間。 專為方便安裝平面樣品而設計。 |
PTC1 塗層測試槽 用於塗層樣品的電化學測試。 非常適合使用 EIS 測試塗層金屬樣品。 |
H-CELLS 薄膜研究。 燃料電池研究。 電化學水電解。 |
|
鋰離子電池電解槽 可用：鋰電池材料半電池套件、全電池套件和標準電池套件。 操作容積 : 25 mL。 |
18650 / 鈕扣電池治具 四極式開爾文型測量。 鈕扣電池或圓柱型電池治具。 |
通用性電池治具 適用於硬幣大小至較大的圓柱型電池 ( 最大26650圓柱鋰電池)。 四極式測量。 最高 30A。 保險絲保護。 |
軟包裝電池治具 適合不同尺寸的軟包電池。 四極式測量。 電流高達30A。 保險絲保護。 |
|
PORTHOLES 電化學樣品遮罩 可用面積1、3 或 10 cm²。 當使用 O 形圈將樣品密封到電化學池槽，還可將它們用於減少產生的縫隙腐蝕。 |
電池治具 四探針Kelvin型測量治具。 紐扣式或柱狀電池治具。 |
Electrochemical Cells
An electrochemical workstation has a potentiostat and relevant control software on one end, and the electrochemical cell setup—generally inside a Faraday cage—on the other. Electrochemical cells are designed to hold a working, reference, and counter electrode in an appropriate geometry, but beyond that they can vary a great deal.
Gamry has electrochemical cells for general, as well as specific, experiments. We design as much flexibility as we can into each cell without compromising the cell's ability to perform needed tasks.
We also carry a number of electrochemical accessories for your research.
|
1L Rotating Cylinder Electrode CellThe 1L RCE Cell is designed for rotating cylinder studies. |
Dr. Bob's Cell Working Volume: Between 1 mL and 30 mL Equipped with 5 multi-purpose ports Available in non-jacketed or a jacketed version |
EuroCell Electrochemical Cell KitWorking Volume: Between 50 mL and 200 mL Available in jacketed and unjacketed versions |
FlexCell Critical Pitting Temperature Cell KitDetermine Critical Pitting Temperature Counteracts crevice corrosion around the specimen seal Powerful tool for studying localized corrosion |
|
MultiPort Corrosion Cell Kit Working Volume: Between 400 mL and 1200 mL 2 piece design allows oversized samples in the cell The workhorse of a corrosion lab |
ParaCell Kit for Flat Specimens (Standard) Working Volume: Between 250 mL and 400 mL Designed for convenient mounting of flat samples |
ParaCell Kit for Flat Specimens (Glass Body & Polycarb End)With Polycarbonate Ends (#992-00196) Designed for convenient mounting of flat samples |
PTC1 Paint Test CellFor electrochemical testing of coated samples Perfect for testing of painted metal specimens using EIS |
|
H-CellsMembrane Research Fuel Cell Studies Echem Water Spitting |
Lithium Battery Cell Available: Lithium Battery Materials Half Cell Kit, Full Cell Kit, and Standard Cell Kit Cell Volume - up 25 mL |
18650 / Coin Cell Battery Holders4-terminal Kelvin-type measurements Coin Cell or Cylindrical Battery Holders |
Universal Battery HolderFor coin-sized to larger cylindrical batteries (up to 26650) Four-terminal connections Up to 30A Fuse protected |
|
Pouch Cell HolderGood for a variety of pouch cell sizes Four-terminal measurements Up to 30A Fuse protected |
PortHoles Electrochemical Sample Masks1, 3, or 10 cm2 Reduce crevice corrosion when samples are sealed to a cell with an O-ring |
